17
ArtNo.320-0031 90SC
removing the shelf 1
ArtNo.320-0032 90SC
removing the shelf 2
Fig. 2.20
Fig. 2.21
Accessories
refer to
Any shelf can be fitted in any of the positions. The oven
shelves are retained when pulled forward but can be easily
removed and refitted.
To Remove and Refit the Ladder Shelf Supports
Lift the ladder support hooks out of the two locating holes in
the oven side (or divider) before lifting the support clear of
the bottom ladder restraint.
Refit by inserting the bottom of the ladder into the restraint
before fitting the hooks through the locating holes.
To Remove and Refit the Shelves
Pull the shelf forwards until the back of the shelf is stopped
by the shelf support (
). Lift up the front of the shelf
so the back of the shelf will pass between the supports and
then pull the shelf forward (
Refit in the reverse order, making sure to push it fully back.
Storage
The bottom drawer is for storing oven trays and other
cooking utensils. The drawer can be removed completely for
cleaning, etc.
n
It can get very warm, so do not store anything in it
that may melt or catch fire.
n
NEVER store flammable materials in the drawer.
This includes paper, plastic and cloth items, such
as cookbooks, plastic ware and towels, as well as
flammable liquids.
n
DO NOT store explosives, such as aerosol cans, on or
near the appliance.
n
Flammable materials may explode and result in fire
or property damage.
Summary of Contents for Classic FX 90 Induction
Page 2: ......
Page 4: ...ii...
Page 47: ......
Page 48: ...Clarence Street Royal Leamington Spa Warwickshire CV31 2AD England www falconworld com...
