INSTALLATION
Check the appliance is electrically safe when you have finished.
29
Dear Installer
Before you start your installation, please complete the details
below, so that, if your customer has a problem relating to
your installation, they will be able to contact you easily.
ArtNo.050-0011 - Installer information table
Installer’s Name
Appliance Serial Number
Installer’s Telephone Number
Installer’s Company
Safety requirements and
regulations
You must be aware of the following safety requirements &
regulations.
n
This cooker must be installed in accordance with
the relevant instructions in this booklet, with the
relevant national and local regulations, and with the
local electricity supply companies’ requirements.
n
The appliance must be installed in accordance with
the regulations in force and only in a well ventilated
space.
n
Read the instructions before installing or using this
appliance.
Provision of ventilation
This appliance is not connected to a combustion products
evacuation device. Therefore, particular attention must be
given to the relevant requirements regarding ventilation.
All rooms require a window that can be opened, or
equivalent, while some rooms require a permanent vent in
addition to the window.
Location of cooker
The cooker may be installed in a kitchen/kitchen diner but
NOT
in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use for
any other purpose could invalidate any warranty or liability
claim.
You will need the following equipment to complete the
cooker installation satisfactorily:
•
Stability bracket may be installed.
This is not supplied
with the cooker
but is available at most builders’
merchants.
•
Multimeter (for electrical checks).
•
Allen keys (provided in pack).
You will also need the following tools:
1.
Electric drill
2.
Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3.
Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4.
Steel tape measure
5.
Cross head screwdriver
6.
Flat head screwdriver
7.
4 mm & 3 mm Allen keys
8.
Spirit level
9.
Pencil
10.
Adjustable spanner
11.
Screws for fitting stability bracket
12.
13 mm spanner or socket wrench
9. Installation
Summary of Contents for Classic FX 90 Induction
Page 2: ......
Page 4: ...ii...
Page 47: ......
Page 48: ...Clarence Street Royal Leamington Spa Warwickshire CV31 2AD England www falconworld com...