8
2.5 SAFETY
RESET
2.5.1 The
safety thermostat
is to prevent fire in the event of an operating thermostat failure
and will prevent the main burners from working. If the burners don’t turn on, it may be
due to the safety cut-out and the safety thermostat will need to be reset.
2.5.2 To reset the safety thermostat, first ensure the
gas control
is turned
OFF
and wait at
least half an hour for the oil to cool. Remove the black dust cover and press the safety
thermostat reset button with a pen or similar item as shown below.
IF SAFETY CUT-OUT CONTINUES, A QUALIFIED ENGINEER
MUST INVESTIGATE THE CAUSE.
