Falcon Elan, User Manual

33

SERVICING  - WARNING 

Disconnect  from  electricity  and  gas  before  servicing.  Check  appliance  is  safe  when  you  have  finished.

Australia

When fitting the new seal, position the seal join at the 
bottom. Hook the new seal in one of the corner holes of the 
door, and proceed round the door snapping in each hook 
in turn.

21. To Change Ignition Generator

Pull the cooker forward to gain access to the cover box at 
the rear of the left hand oven. Remove the screws securing 
the cover and lift clear. Pull off all the leads to the generator, 
noting their positions. Slacken the two screws holding the 
generator to the cooker and remove the generator.
Fit the new generator to the cooker and replace the leads, 
referring to the wiring diagram. Re-assemble in reverse 
order. Check ignition performance.

22. To Remove an Oven Inner Back

Open the oven door and remove the oven furniture.
Unscrew the two thermostat phial fixing screws (see section 
7). Remove the fixings that secure the inner back to the 
oven rear:

Lift the removable panel away. Re-assemble in reverse 
order, ensuring that the retaining fixings are fully tightened. 

23. To Replace an Oven Fan

Pull the unit forward to access the cover boxes at the rear of 
the appliance. Remove the fixings that secure the cover and 
lift it clear. Remove the fan wiring, noting the connection 
positions. Remove the inner back as detailed in section 
22. Hold the fan blades and undo the centre nut (left hand 
thread), brass washers, fan blade and Circlip. Undo the 
fixings that retain the fan and remove it from the cavity rear. 
Fit the replacement and re-assemble parts in reverse order. 
Check that the oven operates satisfactorily.

24. To Replace an Oven Fan Element

Remove the oven inner back as detailed in section 22. 
Remove the fixings that secure the element within the oven 
and lift the element away carefully. 

Disconnect the leads and connect to the replacement 
element. Re-assemble the parts in reverse order. Check that 
the oven operates correctly.

25. To Remove Grill Element

Remove the grill pan from the grill chamber. From 
inside the grill compartment, remove the enamelled 
front shield from the grill roof, and the two screws and 
washers.
Remove the two screws and washers securing the grill 
element front support. Remove one screw from each of 
the grill elements and withdraw the grill element from 
the grill chamber.
Disconnect the leads and connect to the replacement 
elements. Re-assemble the parts in reverse order. Check 
the operation of the grill.

26  To Remove the Left hand Oven Bottom and Top 

Elements

Bottom Element

Pull the cooker forward to access the cover boxes at the rear 
of the unit. Remove the fixings that secure the cover and lift 
it clear.

Remove the two screws ‘A’ and allow the plate to drop 
down.