INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
19
Checking the Parts:
You will need the following equipment to complete the
cooker installation satisfactorily:
•
Stability bracket: If the cooker is to be supplied with
gas through a flexible hose, a stability bracket or chain
MUST be fitted.
These are not supplied with the cooker
but are
available at most builders’ merchants.
•
Gas pressure tester/manometer.
•
Flexible gas hose: Must be in accordance with the
relevant standards.
•
Multimeter: For electrical checks.
You will also need the following tools:
1.
Electric drill
2.
Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3.
Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4.
Steel tape measure
5.
Cross head screwdriver
6.
Flat head screwdriver
7.
Spirit level
8.
Pencil
9.
Allen keys (supplied)
10.
Adjustable spanner
11.
Screws for fitting stability bracket
12.
13 mm spanner or socket wrench
4 pan supports
Wok cradle
ArtNo.255-0012 -
110DF - Elise pan supports
ArtNo.000-0009 Wok ring, cast
2 flat shelves
2 drop shelves
Handyrack
Roasting tin & trivet
ArtNo.324-0003 Handyrack
Plinth
ArtNo.350-0008 - 90 SC plinth
Summary of Contents for Elise SE 110 Dual Fuel
Page 1: ...Elise SE 110 Dual Fuel USER GUIDE INSTALLATION INSTRUCTIONS...
Page 4: ...ii...
Page 33: ...29...
Page 34: ...30...