FALCON F +
USER MANUAL
DCI DigiGuide
10.31.2022
DIGITAL CONTROL, INC
22
STEP 7 OF 8
Click Transmitter pairing
request.
Do not move the transmitter until you hear four beeps and a
check mark appears.
STEP 8 OF 8
Confirm the pairing and power mode, and then click to continue to
Calibration.
ADVANCED FO - SCAN
STEP 1 OF 7
Before You Start
Scan Pick Pair
allows you to scan the bore path for noise and then select the
lowest noise bands identified by the locator or manually.
You may decide to continue to use the currently selected bands or to select
bands manually if you know you need a specific band, such as a low-
frequency band (7 or 11) to account for rebar or other interference.