FALCON F +
USER MANUAL
DCI DigiGuide
10.31.2022
DIGITAL CONTROL, INC
31
STEP 1 OF 4
To change the
transmitte
r to the Down Band, hold the Tx at the same (±2)
general clock position (CP) for this whole procedure.
Hold transmitter powered on at level (0±10°) for at least five seconds.
STEP 2 OF 4
Tilt transmitter up at
approx. +65° (almost
vertical) for 10-18 seconds.
STEP 3 OF 4
Return to level for 10-18 seconds.
When the transmitters changes bands, data disappears from the locator.
You can also use the Power-on Method described in "Change
Transmitter Band, Power-On Method" article in the Advanced
Topics Chapter.
STEP 4 OF 4
To change the
locator
to the Down band, from the Locate Mode screen, hold
toggle right to open Band Selection shortcut menu, and then select the
desired band.