FALCON F +
USER MANUAL
DCI DigiGuide
10.31.2022
DIGITAL CONTROL, INC
68
Klarus Part number: GT-
Fenix Part number: ARB-L -
Acebeam Part number: IMR
NP-
A
TRANSMITTER OVERHEAT INDICATOR (TEMP DOT)
DigiTrak transmitters (Tx), with the exception of DucTrak, have temperature
overheat indicators (temp dot) on the front end cap.
1. Black temp dot (voids warranty)
2. Normal white temp dot
The temp dot has an outer yellow ring with a temperature-sensitive 3.15 mm
white dot in the center. If the center temp dot is black, the transmitter has
been exposed to excessive heat and should no longer be used.
The DCI Warranty does not cover any transmitter that has been
overheated or had the temp dot removed.
TRANSMITTER TEMPERATURE WARNINGS
STEP 1 OF 6
DigiTrak transmitters (Tx), with the exception of DucTrak, have an internal
digital thermometer. The normal below ground temp range is 17° ‒ °C. The
Tx temperature displays on the bottom right of the locator screen and
remote display screens.