FALCON F +
USER MANUAL
DCI DigiGuide
10.31.2022
DIGITAL CONTROL, INC
72
a. On the Main Menu, select
Calibration.
b. Select 1 PT Cal.
If you have a new transmitter, or locator, you must optimize,
pair your frequencies, and recalibrate.
c. Using a tape measure, place the
near edge
of the locator parallel to and
exactly 3 m from the
center
of the transmitter.
d. Click Select to calibrate.
STEP 4 OF 4
If you still don't have roll and pitch data, call DCI for further troubleshooting.
DEPTHS ARE INCORRECT
STEP 1 OF 3
Verify calibration is correct above-ground.
a. Measure out 3 m from the center of your housing to the inside edge of the
locator.