background image

G3425, G3625, G3925,

 

G31225 and G31525 Chargrills

 

G3625, G3925, G31225

 

and G31525 ES Chargrills

 

INSTALLATION and SERVICING 
INSTRUCTIONS

 

 

The  appliance  must  be  installed  and  serviced  by  a  qualified  person  as  stipulated  by  the  Gas 
Safety 

(Installation & Use) 

Regulations.

 

IMPORTANT

 

The  installer  must  ensure  that  the  installation  of  the  appliance  is  in  conformity  with  these  instructions  and 
National Regulations in force at the time of installation. Particular attention MUST be paid to:

 

Gas Safety 

(Installation & Use) 

Regulations 

Detailed recommendations are contained in   
Institute of Gas Engineers published documents:   

IGE/UP1

IGE/UP/2

 

BS6173 

and 

BS5440

 

 

Health And Safety At Work etc. Act 

Local and National Building Regulations 

Fire Precautions Act 

 

The  appliance  has  been  CE-marked  on  the  basis  of  compliance  with  the  Gas  Appliance  Directive  for  the 
Countries, Gas Types and Pressures as stated on the data plate.

 

WARNING

TO  PREVENT  SHOCKS,  ALL  APPLIANCES  WHETHER  GAS  OR  ELECTRIC, 

MUST BE EARTHED.

 

On  completion  of  the  installation,  these  instructions  should  be  left  with  the  Engineer-in-Charge  for reference 
during  servicing.  Further  to  this,  The  Users  Instructions  should  be  handed  over  to  the  User,  having  had  a 
demonstration of the operation and cleaning of the Appliance.

 

IT  IS  MOST  IMPORTANT  THAT  THESE  INSTRUCTIONS  BE  CONSULTED  BEFORE  INSTALLING  AND 
COMMISSIONING  THIS  APPLIANCE.  FAILURE  TO  COMPLY  WITH  THE  SPECIFIED  PROCEDURES 
MAY RESULT IN DAMAGE OR THE NEED FOR A SERVICE CALL.

 

PREVENTATIVE MAINTENANCE CONTRACT

 

In  order  to  obtain  maximum  performance  from  this  unit  we  would  recommend  that  a  maintenance  contract 
be  arranged  with 

SERVICELINE

.  Visits  may  then  be  made  at  agreed  intervals  to  carry  out  adjustments and 

repairs. A quotation will be given upon request to the contact numbers below.

 

 

WEEE Directive Registration No. WEE/DC0059TT/PRO    

At end of unit life, dispose of appliance and any replacement 
parts in a safe manner, via a licensed waste handler.

 

Units are designed to be dismantled easily and recycling 
of all  material is encouraged whenever practicable.

 

 

Falcon Foodservice Equipment

 

HEAD OFFICE AND WORKS

 

Wallace View, Hillfoots Road, Stirling. FK9 5PY. Scotland.

 

 

SERVICELINE CONTACT

 

Phone: 01438 363 000 

Fax: 01438 369 900

T100766 Ref. 6

 

Summary of Contents for G3425









Reviews: