INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
24
You will need the following equipment to complete the
cooker installation satisfactorily:
•
Stability bracket: If the cooker is to be supplied with gas
through a flexible hose, a stability bracket or chain
must
be fitted.
These are not supplied with the cooker
but
are available at most builders’ merchants.
•
Gas pressure tester/manometer.
•
Flexible gas hose: Must be in accordance with the
relevant standards.
•
Multimeter: For electrical checks.
You will also need the following tools:
1.
Electric drill
2.
Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3.
Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4.
Steel tape measure
5.
Cross head screwdriver
6.
Flat head screwdriver
7.
Spirit level
8.
Pencil
9.
Adjustable spanner
10.
Screws for fitting the stability bracket
11.
4 mm & 3 mm Allen keys
12.
13 mm spanner or socket wrench
3 pan supports
Griddle (Supplied)
ArtNo.000-0001 90 Pan supports
Teppanyaki (Optional)
Wok cradle (Supplied)
ArtNo.311-0043 - Griddle 09
ArtNo.000-0009 Wok ring, cast
Deluxe oven tray and trivet
2 left-hand oven shelves
2 right-hand oven shelves
Grill pan
ArtNo.326-0015 - Energy saving shelf (Falcon)
ArtNo.331-0008 - 90SC
grill pan & trivet
Magnetic plinth