Falcon Professional+ FX 100 Dual Fuel, User'S Manual & Installation Instructions

INSTALLATION

Check the appliance is electrically safe and gas sound when you have finished.

25

ArtNo.110-0004 - 110 Cooker min spacings

5 mm

5 mm

Height to Hotplate

905 mm min

930 mm max

Height to Flue Trim

920 mm min

945 mm max

650 mm min

410 mm min

410 mm min

Wall

Wall

1004 mm

75 mm min

75 mm min

check cookerhood instructions for actual dimensions

994 mm

905 mm min

930 mm max

75 mm

min

75 mm

min

650 mm

min

Profes 100 FX

Positioning the Cooker

Fig. 8.1

 and 

Fig. 8.2

 show the minimum recommended 

distance from the cooker to nearby surfaces.
The cooker should not be placed on a base.
Above hotplate surround should be level with, or above, any 

adjacent work surface.
A gap of 75 mm should be left between each side of the 

cooker 

ABOVE

 the hotplate level and any adjacent vertical 

surface.
For non-combustible surfaces (such as unpainted metal or 

ceramic tiles), this can be reduced to 25 mm.
A minimum space of 650 mm is required between the top of 

the hotplate and a horizontal combustible surface.

*Any cookerhood should be installed in accordance with the 

hood manufacturer’s instructions.
**Any splashback must be fitted in accordance with the 

manufacturers instructions. Allowance should be made for the 

additional height of the flue trim, which is fitted to the cooker 

hob. 

Surfaces of furniture and walls at the sides and rear of the 

appliance should be heat, splash and steam resistant. Certain 

types of vinyl or laminate kitchen furniture are particularly 

prone to heat damage and discolouration.
We cannot accept responsibility for damage caused by 

normal use of the cooker to any material that de-laminates 

or discolours at temperatures less than 65 °C above room 

temperature.

DO NOT

 box the cooker in – it must be possible to move the 

cooker in and out for cleaning and servicing.

Moving the Cooker

n

On no account try and move the cooker while it is 

plugged into the electricity supply.

n

The cooker is very heavy, so take great care.

We recommend that two people manoeuvre the cooker. 

Make sure that the floor covering is firmly fixed, or removed, 

to prevent it being disturbed when moving the cooker 

around.
To help you, there are two levelling rollers at the back, and 

two screw-down levelling feet at the front.
Remove the polystyrene base pack. From the front, tilt the 

cooker forward and remove the front half of the polystyrene 

base (

Fig. 8.3

). Repeat from the back and remove the rear half 

of the polystyrene base.

Fig. 8.1

Fig. 8.2

Fig. 8.3