background image

6.

Technical Support

Should your FALCON

®

Electric SG Series UPS require service or you need 

technical assistance, you can contact us at:

Falcon Electric Inc.   

Irwindale, CA. 91706
Service 800.842.6940
Voice 626.962.7770
Fax 626.962.7720
Email: service@falconups.com
WWW.FALCONUPS.COM

Please have your UPS model, serial numbers and date of purchase on hand 
prior to your call. This information is located on the identification label on the 
rear panel of the unit. This information is essential in retrieving your unit’s 
historical records. Should our service department determine service is required,
you will be given a Return Material Authorization number (RMA) along 
with return shipping instructions.

The RMA number issued must appear on the outside of the shipping carton. 
The original shipping container must be used when returning any SG  
Series product. Falcon

®

Electric will not assume any responsibility for shipping 

damage. In the event of shipping damage, you will be notified of the damage 
and be instructed to file a claim with the freight carrier. You will be billed for all 
repairs caused by the shipping damage. You must submit a copy of our repair 
invoice to the carrier for reimbersment.

All units must be returned prepaid.  The address and shipping instructions will 
be given to you at the time the RMA is issued.

7.

Requesting Technical Information or Support

You may request technical information or support by email or telephone. 

Please send your technical or support questions by email to:

SUPPORT@FALCONUPS.COM

You may contact a FALCON support engineer directly by calling the FALCON 
support line between 9:00 am and 4:00 pm PST. 

800.842.6940

8.

FALCON Web Support

Product data sheets, specification and owner’s manuals are available in 
Adobe

®

Acrobat .PDF format on our corporate website.

WWW.FALCONUPS.COM

20

5116 Azusa Canyon Road

Summary of Contents for SG2K-X1T

























Reviews: