background image

1.   TIME AND SCOPE OF WARRANTY:
1.1

FALCON

®

hereby warrants parts shipped under this Agreement to be free from defective workmanship for 

a period of 

one year

following date of shipment.  Accidental damage, misuse or normal wear and tear shall

not be construed as a defect.

1.2

The date of shipment as used herein will be the date on the Bill of Lading.  If no Bill of Lading is issued, 
the date of shipment shall be shown on seller's shipping document.

1.3

No provision of this warranty shall cover equipment which has been altered or modified from the originally 
specifications manufactured unless authorized in writing.

1.4

No provision of this warranty shall cover batteries.  However, battery manufacturer's warranties will be 
passed through to the customer whenever applicable.

2.   LIMITS OF "IN WARRANTY" SERVICE LIABILITY:
2.1

FALCON

®

is obligated during the in-warranty period to provide service and/or adjustments to equipment 

returned to the factory at the expense of buyer (the term "factory" as used here-in shall also include any 
field service centers which may be established by FALCON

®

) and to repair or replace any part(s) thereof 

which in the opinion of authorized FALCON

®

personnel are found to have been defective during the 

warranty period.

2.2

Equipment requiring in-warranty services must be returned to the factory with all transportation charges 
prepaid, clearly tagged, stating the nature of the trouble experienced, and the disposition of the equipment 
after repair.  The equipment will be returned freight collect by FALCON

®

to the location specified via the 

best and least expensive carrier available or via customer's shipping instructions.

2.3

During the in-warranty period, no service charges shall be payable by the buyer for service performed 
other than for service necessitated by accident, misuse, theft, abnormal line or source voltage fluctuations, 
abnormal conditions of operation, damage by the elements or damage resulting from adjustments, repairs, 
modifications made by anyone other than FALCON

®

authorized personnel, or the buyer's failure to 

reasonably maintain the equipment. 

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS GIVEN AND ACCEPTED IN LIEU OF ANY AND 
ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE 
REMEDIES OF BUYER SHALL BE LIMITED TO THOSE PROVIDED HEREIN.  IN NO EVENT WILL 
SELLER BE LIABLE FOR COLLATERAL OR CONSEQUENTIAL DAMAGES.  No person is authorized to 
assume on behalf of FALCON

®

any obligation or liability in connection with the sale, warranty or service 

policy of any products manufactured and/or marketed by FALCON

®

beyond the warranty description on 

the face hereof.

3.

FALCON

®

ELECTRIC reserves the right to make changes, additions, and/or improvements in its products 

without incurring any obligation to install them on its products previously sold.  This Warranty is valid for 
FALCON

®

product as sold.

WARRANTY

WARRANTY

16

Summary of Contents for SUP1.0K-1C



















Reviews: