01
02
02
Connect your mobile device to your WiFi and download the App “Faleemi” from the App Store or
Google Play store, or scan below QR code to download it.
Download the Faleemi APP (Android / iOS) before doing the setup
Now, please follow below instructions to get your camera set up.
Before configuring your camera, please read the points below.
NOTE
Please make sure the camera is in the same room, close to the router, before performing the
setup. You can relocate it to where you want after it is all set up. You just unplug it and move it to
the new location and plug it in, the camera will connect to your WiFi automatically, no need to set
it up again.
Please make sure your phone is connected to your
2.4GHz WiFi
(not cellular data and 5GHz
WiFi)
before doing the setup. Your 2.4GHz WiFi name (SSID) must be different from your
5.0GHz one.
Please make sure your WiFi name and password do not have the special characters "
&
"
and "
'
"(apostrophe).
If you are not sure, please go to your router settings to find this out.
Note: THIS WILL NOT AFFECT THE 5GHz WIFI USE OF YOUR OTHER WIRELESS DEVICES : )
If you don’t know how to go to your router settings, please visit our website
www.faleemi.com/blocks/router
to find the instructions or contact us at
support@faleemi.com
.
If you don’t see the
blue light
, please do a “
Factory Reset
”. This process is outlined on
Page 30
of this manual. [“
7. How to reset your camera (restore to factory default)?
”].
Speaker
DC 5V Power
IR LEDs
Lens
Memory Card Slot
WPS/Reset Button
Light Sensor
Built-in Microphone
Status LED
*
What’s in the box?
FSC776 HD Pan/Tilt Wireless Security IP Camera
Ceiling/Wall Mounting Bracket
Mounting Screws & Plugs
Power Adapter
Quick Start Guide
*FSC776W
*FSC776W
Mounting Bracket
Power Adapter
FSC776B
Status LED
*
Solid Light
Blinking Quickly
Blinking Slowly
Indicator Light Status
Device Status
Connections
ket
Red light is blinking slowly
Red and blue lights are blinking slowly
Blue light is blinking quickly
Blue and red lights are solid and steady
Red light is blinking quickly
Blue light goes off
Power up and activating
The device is ready to connect
The device is receiving the WiFi signal or connecting to the WiFi
The device is connected to the network
The device is reset to restore to factory default
The device failed to connect to the network
Model: FSC776B/W
Quick Start Guide
HD Pan/Tilt WiFi Security IP Camera
