1. Navigation
view
Info Box:
Shows information about the calculated route. Tap on the box to select other
information which should be displayed there. For example, you can also display the current
altitude, the time or the gradient.
Note
: If you select "north bearing" and no value is displayed, please calibrate the compass
(see Chap. 6.3.5).
Map:
Shows the map extract with your current position. However, you can also move the
map with your finger. Using the
button, which then appears at the bottom, you can
return the map back to your current position.
Next Manoeuvre
:
In the manoeuvre box you are shown, via an arrow, the next turn-off direction,
other roads which lead off and the distance to your next manoeuvre. If you are on
a roundabout, the other roads which lead off are also shown in addition to your
turn-off arrow.
Relevant crossroads and junctions located before you get to your next turn-off
point are also shown. If there are several crossroads leading off prior to your next
manoeuvre, numbers at the side indicate how many crossroads you still need to
pass.
Note:
If you click on the manoeuvre box, the system will tell you what the next turn-off
command is.
If you need to perform several manoeuvres in quick succession, the next-but-one manoeuvre
is shown in the form of a directional arrow above the Manoeuvre box (with a grey
background). This means you can always see where you are heading in good time.
Falk IBEX User Manual
11
Summary of Contents for IBEX
Page 1: ...User Manual ...