10
STANDBY TIME: When the battery is fully charged and continuously worn, it can be used continuously for
20 to 30 hours (Depending on the specific use of the situation this will have some deviation)
BATTERY CAPACITY: 900mAh
BATTERY TYPE: Lithium polymer
CHARGING VOLTAGE: DC4.2V; NOMINAL VOL: 3.7V
STANDARD CHARGING CURRENT: 180mA,
STANDARD CHARGING TIME: about 6 -7 hours
BATTERY LIFE: Standard charge and discharge cycles 300 times
PACKAGING ACCESSORIES: Fall Safe Wearable Airbag x1, charger x1, user manual x1
8.
PRODUCT EXCEPTIONS HANDLING
When a Fall Safe Wearable Airbag is properly worn and connected to a power supply, the product will
automatically perform an internal inspection test to check whether all circuit components are working
properly. If there is any failure, your Fall Safe Wearable Airbag will warn you by the LED indicator lights,
with all 4 LED lights continuing to flash rapidly until the batter is flat as described in point 5.1.d.If your Fall
Safe Wearable Airbag has the above situation, please contact our customer service department
https://fallsafe.com.au/contact/ as soon as possible.
9.
PRODUCT MAINTENANCE
a)
Fall Safe Wearable and the airbag module can be disassembled.
b)
The airbag module (including electrical parts, gas generator, airbag, etc.) must be stored in a dry
place away from sunlight.
c)
Fall Safe Wearable can be washed as per washing label attached. DO NOT WASH THE AIRBAG
MODULE. To clean the airbag module, wipe the surface with a soft, damp cloth.
d)
The airbag module (including electrical parts, gas generator, airbag, etc.) must be stored in a dry
place away from sunlight and storage temperature must be between -20
℃
~ + 60
℃
.
e)
Please charge the battery periodically. If no service or recharge operation has been conducted
after 500 hours and or 1 year of functioning from the last use, there might be a possibility that Fall
Safe Wearable Airbag will not work properly.
f)
Do not leave Fall Safe Wearable Airbag unattended while charging the battery.
g)
Charge only in a dry location with a temperature range of 0
℃
~ + 40
℃
. Exposure to temperatures
over this range may cause permanent damage to the Product and affect proper functionality.
h)
If you find that Fall Safe Wearable Airbag is faulty, do not disassemble it by yourself. Instead,
immediately contact our customer service department for technical support.
https://fallsafe.com.au/contact/.
10.
STATEMENT ON HAZARDOUS SUBSTANACES
The materials and processes used for the Fall Safe Wearable Airbag have passed the EU RoHs certification
and wearing will not cause discomfort. If there is any discomfort, stop using the product immediately and
