See figure 2.1 on the next page for a graphic illustration of Clear-Fall Distance and the
method for calculating. It is also necessary to consider the fall path when determining
the Clear-Fall limitations in your application. Ensure the fall path is clear of obstructions,
protrusions, equipment or materials that may be a hazard in the event of a fall. Pay
special attention to those items which may present an impalement hazard. Obstructions
in the fall path may be just as hazardous as the fall itself, and your PFAS may not be
able to protect you from these hazards. Failure to clear the fall path may result in
serious injury or death. Rig your PFAS with extreme caution, and be aware of all of the
factors that may come into play in the event of a fall. If using EcoAnchor with one of the
authorized FallTech Temporary Horizontal Lifelines, be sure to check Appendices A and
B at the end of this instruction manual for additional Clear-Fall guidance.
Figure 2.1: Clear-Fall Diagram
2.10: Swing-Fall
Swing-Fall is the phenomenon that occurs when the user falls from a location that is
not directly adjacent to, or directly below the anchorage connector. This is also referred
to as the “pendulum effect”, and can result in a situation where the user is not only falling
vertically, but is also swinging on the horizontal as well. This can bring additional
hazards into play, as you may swing into an obstruction or structural element, causing
