WARNING
Do not use an incompatible connector with any ToggleLok™ Anchor. Refer to the
separate instruction sheet supplied with the connecting device. This product is designed
for use in precast concrete and steel only.
Follow all manufacturers instructions. Only trained professional personnel should install,
maintain, inspect and use this product and it component or other personal protective
equipment in conjunction with the product.
Do not use this device if its component parts are damaged, cracked, broken or have any
deformation to any structure.
OSHA requires that any personal fall arrest system and all system components be
removed from service and destroyed if a fall event has occurred, loading this device.
This product is not designed to be repaired or altered in any way. A unit that has
sustained a fall arrest must be removed from service and destroyed.
Do not use incompatible connectors with this device. Use only self-locking snap hooks
or carabiners that meet ANSI 359.1 requirements. Use a connector designed for each
application. Ensure all connectors are fully closed and locked. Connector strength must
meet the 5,000 lb requirements.
All personal fall arrest systems must meet all applicable state, federal, city, OSHA and
ANSI requirements, and any other regulating government body requirements. It is the
responsibility of the employer to regulate its worker and make sure all laws are being
complied with concerning this device.
This anchor point attachment is to be identified by a qualified or competent person by
means of support of a worker. For fall arrest, the anchor point must meet the 5,000 lb
requirement per single user. It is the responsibility of the user and employer to ensure
the I-beam or concrete can meet the anchor requirements, and to ensure proper
anchoring techniques be used with this device.
This anchor device must be used with care. The proper placement of this device will
take into account that, along with lanyard length, the user will not be allowed to free fall
more than six feet. (1.8 m) Ensure the fall path is clear of obstructions and no swing
falls may occur.
Pregnant women and minors must not use this product.
Safe working load is 400 lbs (149.3 kg). Do not exceed this weight.
Always inspect units prior to use.
Use the proper coupling methods to the anchor.
Remove unit from service is fall event has occurred.
