3.0 System Requirements
2.1 Description:
The FallTech Confined Space Pole Hoist, see Figure 1, is designed for use with a suitable anchor point above or beside a
confined space entry point, see Figure 2.
2.0 Application
2.2 Purpose:
The FallTech Confined Space Pole Hoist is designed to work as part of a system to raise or lower a person or material to
work in a confined space for entry, retrieval, fall arrest applications, and material handling using a winch or Self Retracting
Lifeline - Retrieval (SRL-R). The Pole Hoist is used along with an overhead anchor point for confined space openings such as manholes,
sewer openings, and tank hatches.
2.3 Application Limits:
An anchorage selected for PFAS must have a strength able to sustain a static load applied in the direction
permitted by the PFAS of at least:
a) Two times the maximum arrest force permitted when certification exists, or
b) 5,000 lbs. (22.2 kN) in the absence of certification.
2.4 System Capacity:
The maximum capacity of the FallTech Confined Space Pole Hoist is one worker for confined space entry and
egress, with the worker weighing no more than 310lbs (140kg) including clothing, tools, etc. The maximum capacity of the Confined
Space Pole Hoist for material handling is 310lbs.
3.1 Compatibility of Connectors:
Connectors are considered to be compatible with connecting elements when they have been designed
to work together in such a way that their sizes and shapes do not cause their gate mechanisms to inadvertently open regardless of how
they become oriented. Contact FallTech if you have any questions about compatibility. Connectors must be compatible with
the anchorage or other system components. Do not use equipment that is not compatible. Non-compatible connectors may
unintentionally disengage, see Figure 3. Connectors must be compatible in size, shape, and strength. Self-closing, self-locking snap hooks
and carabiners are specified by OSHA and ANSI Z359.12.
3.2 Compatibility of Components:
Equipment is designed for use with approved components and subsystems only. Substitutions or
replacements made with non-ANSI Z359 compliant components or subsystems may jeopardize compatibility of equipment and may
affect the safety and reliability of the complete system. Ensure compatibility between the connectors if non-FallTech components are used
for fall protection.
3.3 Connectors:
Only use self-locking snap hooks, rebar hooks, and carabiners with this equipment. Only use connectors that are suitable
to each application. Ensure all connections are compatible in size, shape, and strength. Do not use equipment that is not compatible.
Visually ensure all connectors close and lock completely. Connectors (snap hooks, rebar hooks, and carabiners) are designed for use only
as specified in this manual.
Figure 2 - Confined Space Pole Hoist
011819
MCS41 Rev A
4
Figure 1 - About
1
3
4
2
5
1
Head Assembly
2
Center Guide Pulley/Arm
Length Adjustment
3
Device Mount/Leg Angle
Adjustment
4
Leg Height Adjustment
5
Foot Locking Pin
