4.0 Installation and Use
Figure 3 - Non-Compatible Connections
4.1 Setup
4.1.1
Before setting up the FallTech Confined Space Pole Hoist, perform the Pre-Use Inspection as outlined in Section 6.
4.1.2
Remove the detent pin from the foot assembly, see Figure 4. Rotate the foot 90 degrees, place the detent pin to lock it in position,
see Figure 5.
4.1.3
Remove the detent pin from the leg assembly, see Figure 6. Rotate the leg to a vertical angle, place the detent pin to lock it in
position, see Figure 7.
Figure 6 - Removing Leg Detent Pin
Figure 4 - Removing Foot Detent Pin
Figure 5 - Foot Rotation
Figure 7 - Leg Positioning
011819
MCS41 Rev A
5
