background image

35 

 

Notes 

 

 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

36 

 

Warranty 

 
     
FallTech warrants to the buyer that all products are free from defect in 
material and workmanship at the time of shipment.  Obligation under this 
warranty is limited to product replacement for the period of two (2) years 
from the date of installation or use by the owner, provided that this period 
shall not exceed two (2) years from the date of shipment.  This warranty 
is not transferable.  No other person or firm is authorized to assume or 
assign for FallTech any other warranty in connection with the sale or use 
of this product. 
 
     Furthermore, this warranty is void if any product is changed or altered 
in any way, or if the product is used in a manner other than for which it is 
intended.  This warranty only covers defects in material and 
workmanship; it does not cover conditions resulting from normal wear 
and tear, neglect abuse or accident. 

 

 
 
 
 
 

 
 
 
 
 

MSRL02 ALX 

 

Distributed by Best Materials LLC 

For more information call: 

1-800-474-7570, 602.272.8128 

Website:  http://www.bestmaterials.com 

E-mail:  sales@BestMaterials.com 

Summary of Contents for DuraTech SRL Series



















Reviews: