Falltech Web SRL 7262, Instructions Manual

29 

Section 10:  Specifications 
 

This section contains important information regarding the 

performance and construction of this product.  Pease read and be 
familiar with this and all information contained in this instruction manual. 
 

10.1:  Mandatory Disclosures 

 
     This instruction manual addresses foreseeable hazards, uses and 
applications.  If you have questions about your application that are not 
addressed in this document, contact FallTech for additional guidance. 
 
      It is the responsibility of the employer/issuer of this equipment to 
ensure that it is used in a manner consistent with these instructions.  
Failure to do so could result in series injury or death.  For further reading 
and additional information, see Section 10.4 for a listing of relevant 
standards with which you should be familiar. 
 

10.2:  Performance Specifications 

FallTech  Web Retractors 

Model #s:  7262, 72624, 7263, 8262 

Component Material 

Rating 

Housing 

Alloy Steel 

3,600 lbs 

Drum ABS 

Plastic 

n/a 

Main Shaft 

Alloy Steel 

3,400 lbs 

Pawls/Ratchet Alloy 

Steel 

n/a 

Webbing Polyester 

5,000 

lbs 

Attachment Connector(s) 

Chro-Moly Alloy Steel 

5,000 lbs 

Overall static strength: 

> 3,000 lbs 

* Arrest Forces: 

< 900 lbs 

* Deceleration Distance: 

< 24” 

Maximum Capacity: 

310 lbs 

* When tested in accordance with ANSI Z359.1-2007 

FallTech  Web SRL’s 

Model #s:  7270WR, 7271WR  

Component Material 

Rating 

Housing 

Alloy Steel 

3,000 lbs 

Drum ABS 

Plastic 

n/a 

Main Shaft 

Alloy Steel 

3,000 lbs 

Pawls/Ratchet Alloy 

Steel 

n/a 

Webbing Polyester 

5,000 

lbs 

Attachment Connector(s) 

Chro-Moly Alloy Steel 

5,000 lbs 

Overall static strength: 

> 3,000 lbs 

* Arrest Forces: 

< 900 lbs 

* Deceleration Distance: 

< 24” 

Maximum Capacity: 

310 lbs 

* When tested in accordance with ANSI Z359.1-2007 

30 

FallTech Web SRL’s 

Model #s:  7270KV  

Component Material 

Rating 

Housing 

Alloy Steel 

3,000 lbs 

Drum Alloy 

Steel 

n/a 

Main Shaft 

Alloy Steel 

3,000 lbs 

Pawls/Ratchet Alloy 

Steel 

n/a 

Webbing Kevlar® 

5,000 

lbs 

Attachment Connector(s) 

Chro-Moly Alloy Steel 

5,000 lbs 

Overall static strength: 

> 3,000 lbs 

* Arrest Forces: 

< 900 lbs 

* Deceleration Distance: 

< 24” 

Maximum Capacity: 

310 lbs 

* When tested in accordance with ANSI Z359.1-2007 

FallTech Contractor  Web SRL’s 

Model #s:  7276WR  

Component Material 

Rating 

Housing 

Nylon 6/6 over Alloy Steel 

3,000 lbs 

Drum Aluminum 

n/a 

Main Shaft 

Alloy Steel 

3,000 lbs 

Pawls/Ratchet Alloy 

Steel 

n/a 

Webbing Dyneema® 

4,500 

lbs 

Attachment Connector(s) 

Chro-Moly Alloy Steel 

5,000 lbs 

Overall static strength: 

> 3,000 lbs 

* Arrest Forces: 

< 900 lbs 

* Deceleration Distance: 

< 24” 

Maximum Capacity: 

310 lbs 

* When tested in accordance with ANSI Z359.1-2007 

 
 
10.3:  Labels and Markings 

 
     The labels shown below must be present on the product and must be 
legible.  If labels are not present and legible, remove the product from 
service.