FALMEC EUROP90E1 Instruction Booklet Download

Page: 11 / 60

ENGLISH

SAFETY INSTRUCTIONS

AND WARNINGS

Installation operations are to be carried

out by skilled and qualified installers in ac-

cordance with the instructions in this book-

let and in compliance with the regulations

in force.

DO NOT use the shelf if the power supply cable

or other components are damaged:

disconnect

the shelf from the electrical power supply and con-
tact the Dealer or an authorised Servicing Dealer for
repairs.

Do not modify the electrical, mechanical or func-

tional structure of the equipment.

Do not personally try to carry out repairs or re-

placements. Interventions carried out by incom-

petent and unauthorised persons can cause seri-

ous damage to the unit or physical and personal

harm, not covered by the Manufacturer's warran-

ty.

WARNINGS FOR THE INSTALLER

TECHNICAL SAFETY

Before installing the shelf, check the in-

tegrity and function of each part. Should

anomalies be noted, do not proceed with

installation and contact the Dealer.

Do NOT install the shelf if an aesthetic (or cosmet-

ic) defect has been detected. Put it back into its

original package and contact the dealer.

No claim can be made for aesthetic (or cosmetic)

defects once it has been installed.

During installation, always use personal protective
equipment (e.g.: Safety shoes) and adopt prudent
and proper conduct.
The installation kit (screws and plugs) supplied with
the shelf is only to be used on masonry walls: in case
of installation on walls of a different material, assess
other installation options keeping in mind the type
of wall surface and the weight of the shelf (indicated
on page 2).
Keep in mind that installations with different types of
fastening systems from those supplied, or which are
not compliant, can cause electrical and mechanical
seal danger.
Do not install the shelf outdoors and do not expose it
to atmospheric elements (rain, wind, etc.).

ELECTRICAL SAFETY

The electrical system to which the shelf is

to be connected must be in accordance

with local standards and supplied with

earthed connection in compliance with safety

regulations in the country of use. It must also

comply with European standards regarding radio

antistatic properties.

Before installing the shelf, check that the electrical
mains power supply corresponds with what is report-
ed on the identification plate located inside the shelf.

The socket used to connect the installed equipment
to the electrical power supply must be within reach:
otherwise, install a mains switch to disconnect the
shelf when required.

Any changes to the electrical system must be carried
out by a qualified electrician.

Do not try to solve the problem yourself in the event
of equipment malfunction, but contact the Dealer or
an authorised Servicing Department for repairs.

When installing the shelf, disconnect the

equipment by removing the plug or switch-

ing off the main switch.