39
LIQUID-FOOT PRO SERIES MIDI FOOT CONTROLLER
HOW TO PROGRAM SPECIAL COMMANDS WITH MIDI MESSAGES
The Liquid-Foot Controller has special add-on functionality that is programmed at a MIDI-
command level. Some of these commands enhance features of an IA switch, some Presets,
some can be used for both. Further, there are special commands that enable advanced
control or programmability of interaction with the controller, while others enable control or
interaction with other presets or IA switches.
Within the User Guide you will learn how to utilize some of these functions. Below is a
general understanding of how to access and select these special functions:
To access Special Commands while programming a MIDI command, press the DOWN or UP
button until you see the initial SPECIAL COMMANDS ENTRY screen on the display:
MESSAGE #
Special Command Entry
DESIGNATES SPECIAL COMMAND
Special Command
Command Parameter Value
Press S15 (NEXT) to move to data 1 value (1:). Now select the Special Command to Program
using the UP and DOWN switches.
TUNER:
if you press an IA button programmed with a TUNER SPECIAL COMMAND, then pressing that
IA Switch will turn on the Tuner. Press the button again to turn off the tuner. The Tuner will
recognize a valid device (if plugged in) and grab the tuner data from that device.
