69
LIQUID-FOOT PRO SERIES MIDI FOOT CONTROLLER
Expression Pedal # being edited
MIDI CHANNEL
Default name of current MIDI CC
MIDI COMMAND
CC # (since this is a CC message “B”)
EXPRESSION PEDAL TYPE
The liquid Foot will support four different expression pedal modes (types). Press the UP and
DOWN buttons to scroll through the list. Press S16 (SELECT) to save your setting. An Asterisk
will display to show you which type is currently saved in the global settings. Presets will not
override expression pedals that are not using continuous pedal type. If using any mode other
then continuous- please insure a properly wired momentary switch is being used as the input-
calibration of the pedal switch is very important for the proper operation of the switch.
Press S16 (SELECT) to scroll to the next expression pedal. You will have the ability to modify each
of the four expressional pedal types in this menu.
Current expression pedal being edited
“*” indicated current saved type
Type name currently selected
Continuous
-- The default mode and should be used with most expression pedals. This
mode allows the controller to send MIDI signals from 0-127 based on the position of the
expression pedal.
Latch
-- Otherwise known as Stomp, this mode will send a 127 data value when you first
press the switch down. When you press it again, it will send a 0 data value. This behaves
similar to the IA buttons. In fact, you can use these ports to add more IA buttons.
