78
LIQUID-FOOT PRO SERIES MIDI FOOT CONTROLLER
BULK DUMP
To send all data from the Liquid-Foot’s memory, press the UP button. Make sure your MIDI
receiving device (sequencer, PC, or other storage equipment) is configured and prepared to
receive the Sysex file. It will be sent immediately. This process could take a while, so be
patience.
To skip over this utility, press MENU to return to main menu or P5 to scroll to next menu item.
AUTO LOAD PRESETS
This is a feature packed utility designed to take a lot of hard work off your shoulders. In general
the idea is to allow the liquid foot to take preset information from an external device, and load
that information into the Liquid-Foot automatically. You will be asked to select the first Liquid-
Foot preset # to start loading data into, the first preset from the device to start loading, and
then the last preset in the external device to load. At that point- the Liquid-Foot will query the
external device, and load one patch after another until it has loaded all of the patches
requested.
What can this utility do in part or whole:
1.
Automatically populate the Presets in the Liquid-Foot from information contained in
patches of external device(s) into the memory of the Liquid-Foot.
2.
Automatically synchronize the initial settings of your instant access button(s) for a
preset based on the value (bypass/active/non-existent) state of a specific effect
within your external equipment’s patches.
3.
It will program the first MIDI message of a preset to a Program change message
which will select the patch number on the external device.
4.
It will initialize as many parameters of the Liquid-Foot preset as possible based on
the information it can gather from the external device. Each device behaves
differently and has varying levels of information in its Presets. All those pertinent
parameters will be taken.
What can this utility CAN’T DO:
1.
It cannot automatically program the CC MIDI ON and OFF messages for the IA
switches that are synchronized. YOU MUST PROGRAM THE IA SWITCH CC messages
(ON AND OFF) for each effect you plan to synchronize (if any).
