80
LIQUID-FOOT PRO SERIES MIDI FOOT CONTROLLER
[place LCD screenshot of 1
st
preset of external device entry here]
Above is the next question to answer. Which preset on the external device do you want to start
loading presets from? This can be any number you choose. There are times that you will wish
to load a single patch, or a group of presets not necessarily starting at 0. Just tell the Liquid-Foot
where to start loading from. Press S16 (SELECT) when you are done.
[place LCD screenshot of Last preset of external device entry here]
Above is the next and last question. Which preset is the last preset from the external device that
you wish to load in this process. A couple rules. You cannot load more presets then exist in the
Liquid-Foot. For example, if you started to load presets at location 200 on the Liquid-Foot, you
will not be allowed to auto load more than 53 presets on the device because there are only 253
presets in the Liquid-Foot in version 1.04 of firmware. Further, if the device will not let you load
more patches then the device actually has. For example, if you start at preset 100 of a Line6
device, it will not allow you to load more than 27 presets given there are only 127 presets in a
Line6 POD xt Live. The Liquid-Foot will figure out all of these limitations and only offer options
that are plausible given the above.
TRICK: If you want to load all available patches, then press the DOWN arrow on the request
for a Last preset to load from External device. It will automatically scroll to the largest number
of presets that you can load.
Press S16 (SELECT) once you have entered the last device preset to load. At this point a counter
will begin to scroll from your first patch, to the last. Some devices are slow to load patches, such
as the AXE-FX. Others are incredibly fast (such as the Liquid-Tracks and Line6 devices). Each
device has its own limitations, latency, and processing capabilities. Liquid-Foot was programmed
to take advantage of all known capabilities in the most expeditious manner possible. Maintain
current firmware to insure the most efficient routines are loaded into the personality module.
This will affect the auto program utility as well as remote control mode and other features as
well.
When the autoload process completes, you will be taken back to:
At this point, you can press the MENU key to exit, press P5 to move to the next submenu option
(Erase all memory), or press UP to continue auto loading again.
Automatic Programming from the AXE-FX
SPECIAL NOTES:
