Shenzhen Hpmont Technology Co., Ltd.
Chapter 6 Function Introduction
HD3N-L Series User Manual V1.0
- 45
-
6.2.18
F19: Advanced Parameters
Ref. Code
Function Description
Setting Range [Default]
F19.09 Frequency and speed switch selection
0,1 [0]
0: The given way is speed (m/s).
1: The given way is frequency (Hz).
F19.10 Multi-speed frequency 0
0.00 - F00.03 [0.00Hz]
F19.11 Multi-speed frequency 1
0.00 - F00.03 [0.00Hz]
F19.12 Multi-speed frequency 2
0.00 - F00.03 [0.00Hz]
F19.13 Multi-speed frequency 3
0.00 - F00.03 [0.00Hz]
F19.14 Multi-speed frequency 4
0.00 - F00.03 [0.00Hz]
F19.15 Multi-speed frequency 5
0.00 - F00.03 [0.00Hz]
F19.16 Multi-speed frequency 6
0.00 - F00.03 [0.00Hz]
F19.17 Multi-speed frequency 7
0.00 - F00.03 [0.00Hz]
F19.18 Inspection run frequency
0.00 - 21.00 [6.66Hz]
F19.19 Emergency run frequency
0.00 - F00.03 [3.33Hz]
F19.20 Start run frequency
0.00 - 10.00 [0.00Hz]
F19.44 SVC5 mode
0,1 [1]
0: Formal mode.
1: Optimization mode.
F19.46 SVC flux cutoff frequency
0.30 - 8.00 [0.50Hz]
F19.47 SVC speed estimation filter coefficient
0 - 2 [0]
0: 8.
1: 16.
2: 32.
F19.48 SVC speed observation period
0,1 [0]
0: 1ms.
1: Interrupt.
F19.49 SVC Idling current boost
0,1 [0]
0: Boost.
1: No boost.
F19.50 Low-speed variable carrier enable
0,1 [1]
0: Disenable.
1: Enable.
F19.51 Motor overload protection percentage
150 - 200 [170%]
F19.52 Motor overload protection time
0 - 10 [5s]
0 - 3: Disenable.
4 - 10: Protection.
F19.53 Modify automaticly updated mutual inductance of no-load
current
0,1 [0]
0: Change automatically.
1: No change automatically.
F19.55 Enable about the compensation gains of the electric and power
generation slip are compensated separately
0,1 [0]
0: Disenable.
1: Enable.
6
