LED Anzeige
Akku Ladezu-
stand
ARU-03 Trans-
mitter
ARU-03 Receiver
Connection successful
Connection failed
Power An / La-
dung > 30%
LED lights up in color of the selected channel
The current channel indicator color flashes
The current channel indicator
color flashes
Ladung < 30%
LED flashes slowly in the colour of selected
channel
Ladung < 10%
LED flashes quickly in the colour of the selec-
ted channel
Ladung < 5%
LED flashes quickly and device switches off automatically
Während Auf-
ladung
LED flashes slowly green
Aufladung abge-
schlossen
LED lights green throughout
LED colours and frequency
LED colours
red
green
blue
Frequency
863.7 MHz
864.3 MHz
864.7 MHz
Note
1. Transmitter and receiver may become warm after prolonged use, this is perfectly normal
2. Do not use the transmitter or receiver during charging
3. Receiver automatically turns off after 30 minutes of no signal received from transmitter
DEUTSCH
ENGLISH
Operating instructions:
1. Press the POWER button (2) press and hold the POWER button (2) on the transmitter and receiver
for 2 seconds each to turn on the unit. The LED will light up. The LEDs of the transmitter and receiver
must have the same colour.
If the colors of the LEDs differ, press the POWER button on either ARU-03 until both LEDs light up in
the same color.
Both devices are now connected to each other on the same channel.
The transmitter LED will stop flashing and light up continuously.
2. Insert the transmitter into the instrument and the receiver into an amplifier or other suitable device.
nt stecken und den Empfänger in einen Verstärker oder ein anderes geeignetes Gerät.