Putting into operation:
All connections of the device should be made before switching on. Only use high-quality cables that
are as short as possible for the connections.
DEUTSCH
ENGLISH
Installation:
Be sure to inspect the product for damage before using it. Optimally, use the original packaging or
suitable transport or storage packaging to protect the product from dust, moisture, etc. when not in
use.
1
BYPASS foot switch
Used to switch the effect unit on/off.
2
LED
Displays pedal status
3
COMP controller
Controls the intensity of compression
4
TONE controller
Controls the treble components in the signal
5
MODE switch
Selects between ‚Normal‘ & ‚Treble‘ mode, adjusts treble
6
LEVEL controller
Controls the volume
7
Input
Input jack for standard instrument cable (6.3mm mono jack)
8
Output
With a standard instrument cable, you can connect to these
output another effects pedal or your amplifier
connect
9
DC IN connection
For connecting a power supply DC 9V (-) inside
