3
C
Disconnect the Devices from the I/O Ports
There are some of the optional peripherals or devices installed onto the POS system.
Please detach the peripherals/devices and store them in a secure location.
Note:
Please turn off the whole POS system and devices before unplugging the cables from the
I/O ports.
a. Unplug the cables from the POS Unit.
Place the POS terminal onto a
stable and flat location
Bottom I/O ports
with Power Cable connected
1. Place the POS terminal onto a
stable and flat location.
2. Lift up the whole POS unit and
examine the Bottom I/O ports of
POS unit.
3. Disconnect all of the connected
cables on the Bottom I/O Ports.
Bottom I/O Ports (disconnected)
Note:
Always store the disconnected cables/devices in a secure location for further use.
