CONTENTS
■
SAFETY PRECAUTIONS ..................1
■
MAIN FEATURES
4
■
COMPONENTS & DESCRIPTION
5
■
BEFORE USE....................................7
■
POSITION ADJUSTMENT .............10
■
AFTER USE ....................................13
■
PROGRAMS & SELECTION ...........14
■
PRESET PROGRAMS .....................15
■
MANUAL SELECTION ...................17
■
TROUBLESHOOTING ....................21
■
REGULAR MAINTENANCE FOR
SAFETY .........................................22
■
FAQ ................................................23
■
CARE AND STORAGE ....................25
■
AFTER SALES SERVICE .................26
■
SPECIFICATIONS AND CALL
CENTER .....................................Back
page
25
FAQ
Can I put the chair onto an electric
carpet?
Do not place the chair onto an
electric carpet because it could cause
a fire.
The chair is very heavy, so it could damage the
heat generating parts of the electric carpet and
start a fire.
Can I put the chair onto a wooden
floor or a heated floor?
Yes.
However, because the chair could damage the
floor surface, we recommend laying a carpet or
something similar under the chair. (Same applies
to other floor surfaces)
How do I make the massage
stronger?
Perform the following:
●
Sit back further in the chair so that your
weight is against the reclining seat back.
●
Lower the reclining seat back.
●
Remove the buffer pad placed on the back
pad.
With the methods above, you can intensify the
massage.
How do I make the massage lighter?
Perform the following:
●
Raise the reclining seat back.
●
Place the buffer pad on the back pad.
●
Remove the shiatsu pad and shiatsu sheet.
(When installed)
With the methods above, you can make the massage more
gentle.
Can I use the chair even if I am
overweight?
We recommend the chair be used
by people weighing less than 100 kg.
If you weigh more than that, try sitting slightly
up in the chair, and not reclining too far.
Can the reclining seat back raise
be stopped when a program is
completed?
Yes. It can.
You can stop the automatic reclining seat
back raise operation from operating when the
program is completed by pressing the "Auto
Upright" button.
[F
A
Q
]
