CONFIDENTIAL
8/17
I
FAMOCO SAS – 59 Avenue Victor Hugo – 75116 PARIS – FRANCE
I
Contact@famoco.com
I
Phone: + 33 184169632
I
SIREN: 527 948 814
I
Vat Intracom: FR93527948814
POWER
ON,
STANDBY
AND
SHUTDOWN
The device will automatically switch on when the power is detected. The device will synchronize with the MDM
platform, update its configuration and the installed applications.When fully turned on, according to the configuration,
the color screen will show the main system interface of Famoco, or the Customer’s ownboot animation ("Kiosk" mode).
The standby of the device is controlled by the running application. The application must monitor the conditions of
usingcondition of the device (system time, power conditions...) in order to force the device to the standby status to
reduce its consumption, if necessary.
Forcing standby is mandatory when the validator is operating under battery and the external power to the device has
been turned off. In this case, a standby in less than 5 minutes is strongly recommended in order to save the battery
charge.
The standby state can be quit either by decision of the application (system event) or detecting the external power if it
was cut off.
The shutdown method varies depending on whether the device's configuration includes a battery or not. If a battery is
present, the device will shut down automatically when the charge level drops below 4%. If there is no battery included,
the device Will turn off as soon as the power is cut.
CONTACTLESS
READING
AND
BARCODE
SCANNING
The FX925 validator have an EMV/NFCcontactless card reader and an optical scanner for barcode reading.
The EMV/NFC reader is able to read contactless cards using the standard ISO-14443 type A/B/B’. The precise list of
accepted technologies is available on the product's technical sheet.
The optical scanner is capable of reading 1d and 2d barcodes. It includes a LED lighting in white light, not harmful to
the eyes in case of direct exposure. The illumination allows reading on different supports, smartphone or paper screen,
and any external light conditions. The list of Barcode is available on the product technical sheet.
Barcode reading performance depends on the density and physical size of the barcode itself. For an optimum reading
from the frontal glass, it is recommended not to exceed 40x40mm size for 2d and 50mm length for 1d codes. A larger
size will be read but requires a distance from the window and a precise gesture from the user
.
CONFIGURING
THE
VALIDATOR
AND
INSTALLING
APPLICATIONS
The Famoco’s Android system includesnatively a remote management agent named MDM (
Mobile Device
Management
), together with a SaaS service on the web. This is the major tool for configuring the remote devices and
managing their lifecycles.
Deployed terminals are organized by
Fleets
, and the configuration is grouped by
Profiles
. The set of applications to be
installed on the deployed terminals will be stored in an isolated a secure application container, then added on the
configuration profile and pushed to the fleet terminals.