III OPERATING INSTRUCTIONS
3.1 Auto Mode:
Click "Auto" on the panel or the App to start auto-sensing for cats in / out and auto
cleaning. It is the default mode once the device has powered-on and self-checked.
Notice:
①
Please click "Auto" on the panel or the App to turn-off the auto-sensing feature if the cat is
less than 2.2 lb (1kg) or the cat is pregnant. When the device needs cleaning, you will
need to click "Clean" to start the cleaning process.
②
To clean litter quicker, you can adjust the "cleaning wait time" in the App, for example, 1
minute, in that way you can clean as quickly as possible and reduce the smell. For families
with two or more cats, you can adjust the "cleaning interval" in the App to avoid repeated
ineffective cleaning of the device.
③
If the cat enters the bin for more than 10 seconds, the cat is considered to have potty
behavior. After the cat leaves for 3 minutes, the automatic cleaning procedure will be
performed. (The default interval between cleanups is 15 minutes to prevent the device from
cleaning too frequently during multiple cats' use. The device might not work after the
second cat pees; the interval of two pees is less than 15 minutes.)
④
If the App froze, please check the network status or re-configure the network, or click the
corresponding button on the App and repeat once or twice.
EN
EN
11
12
