1
3
2
TUNING OPTIONS
To enter tuning menu press button
. To navigate inside
the menu, use the D-pad stick:
- Press D-pad up or down to access 5 setups
- Press D-pad right or left to go through the options
and press or hold it up or down to change option values
SHIFTER CALIBRATION
To enter shifter calibration mode, simultaneously press the
two buttons
+ , highlighted below.
PS3 MODE
PC / PS4 MODE
CENTER CALIBRATION
To enter PlayStation 3 mode, first switch to PC mode
and then simultaneously press and hold the two buttons
+
, highlighted below, for one second. To leave PS3
mode it is necessary to switch off and restart the wheel base.
To enter PC / PlayStation 4 Mode, simultaneously press and
hold the two buttons
+ , highlighted below, for one
second.
PlayStation 4 needs no special mode. The wheel has to be/
stay in PC mode.
If a center calibration is needed (e. g. after firmware update of
wheel base) you need to enter the tuning menu by pressing
button
as shown on the graphic
“S_...” will appear on
the display. Now turn the wheel to its center position and
then press two buttons
+ at the same time to calibrate
the wheel center.
Wheel base starts in Xbox mode by default when CSL
Steering Wheel P1 for Xbox One is attached. If you have
swiched to different mode but want to switch back to Xbox
mode, simultaneously press and hold the two buttons
+ , highlighted below, for one second.
XBOX MODE
2
Game
25
Specific
Button 1
26
Game Specific
Button 2
3
4
R1
5
6
L1
9
Touch Pad
Button
12
L3
8
L2
10
Options
R3
11
R2
7
1
R1
L1
Select
L3
L2
Start
R3
R2
S_...
1- Press tuning button
2- Turn the wheel to the center
position
3- Press the two buttons
+
at the same time
