Fanaway Corbelle Installation Instructions
6 |
P a g e V E I L
V e r s i o n 1 . 0 0 4 / 2 0 2 1
FAN INSTALLATION
LIGHT KIT INSTALLATION (Fig.7 & 8)
1.
Loosen the screw (1) from the fan bracket. Align the two slot screws with the keyhole slots (2) of the
light kit bracket. (Fig. 7)
2.
Turn the light kit counterclockwise until the slot screws are firmly at the end of the slots (2).
3.
Secure screw (1) to the light kit bracket. Tighten all three screws. Do not over
-
tighten.
Fig. 7
6. Insert the decorative cover (7) onto the down rod (6) to cover the down rod coupling housing (8).(Fig. 6.5)
7. Insert the canopy (5) over the down rod (6) and install the ball joint (2) and dowel pin (3) back onto the
down rod (6) and secure by tightening the set screws (4). (Fig. 6.5 and Fig. 6.6)
Fig. 6.5
Fig. 6.6
