Fanaway Corbelle Installation Instructions
7 |
P a g e V E I L
V e r s i o n 1 . 0 0 4 / 2 0 2 1
4.
Connect the quick connector to the lamp holder part (3). (Fig. 8)
5.
Secure the lamp
-
holder part (3) to the light kit bracket by tightening the 3 screws (4). Do not
over
-
tighten.
6.
Install the globes (5) to the lamp holders. Do not exceed the maximum power rating.
7.
Install the decorative drops (6) to the light kit.
HANGING THE FAN
Pass the power supply wires (C) from the ceiling outlet box (B) through the center of the ceiling mounting
bracket (D).
Install the ceiling mounting bracket (D) on the outlet box (B) with the mounting screws (F) provided with
the outlet box and washers (E) provided with fan.
Fig. 9
Lift the fan assembly onto the mounting bracket. Ensure the key slot (A) of the hanger ball is positioned
on the key pin (B) of the mounting bracket (C) to prevent the fan from rotating when in operation.
Fig.10
Fig. 9
Fig. 10
Fig. 8
Fig. 9
