Fanaway ORBIT Installation Instructions
6 |
P a g e V 1 . 0 7 / 2 0 2 1
ELECTRICAL WIRING DIAGRAM
WARNING:
To avoid possible electrical shock, be sure you have turned off the power at the main circuit
panel.
Follow the steps below to connect the fan to your household wiring. Use the wire connecting nuts
supplied with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire
strands or connections.
Fig. 7
1.
Connect the household live supply wire
(black) to receiver input wire (black, AC IN L)
as shown in
Fig. 7
2.
Connect the household neutral supply
wire (white) to the receiver input wire (white,
AC IN N).
3.
Connect the household ground wire to
the fan mounting bracket ground wire (green)
and fan body ground wire.
4.
Connect the reveiver output wire (black,
TO MOTOR L) to motor live input wire (black,
TO MOTOR L).
5.
Connect the receiver output wire (white,
TO MOTOR N) to motor neutral input wire
(white, TO MOTOR N)
6.
Connect the receiver output wire (blue,
FOR LIGHT) to fan light live input wire (blue,
FOR LIGHT)
7.
Pull the metal safety cable on the security
hook, tight the safety cable (Fig.8)
8.
After connecting the wires, Turn the connecting nuts upward and push the wiring
into the fan
hanging canopy.
9.
Carefully put the Receiver into the fan hanging canopy. Take care not to damage or loosen any of the
wiring.
Fig. 7
Fig. 8
