INSTALLATION
Note: This is NOT a DIY product. This ceiling fan must be installed by a licensed/qualified
electrician.
CAUTION: Before installing the fan, make sure you have turned OFF the electricity supply.
1. Secure the hanging bracket to the ceiling joist or suitable structure that is capable of carrying a
load of at least 45kg, with the two long fixing screws provided. (Fig 1)
2. Ensure that at least 30mm of the screw
is threaded into the support.
3. Make sure that the position of installation will not allow the blades to come into contact with any
object. The fan must be mounted so that the tips of the blades are at least 2.1 metres above the floor.
4. Carefully lift the fan, and place the down rod ball assembly into the mounting plate. (Fig 2)
5. Slowly rotate the shaft until the ball correctly locks into place. (Fig3)
6
.Refer to the following section detailing ‘Electrical Wiring’ for details on how to wire this
product correctly.
NB: The fixing screws included are designed for use
when ceiling fan is secured onto timber joists.
For all other surfaces, additional and suitable fixing
screws for that surface will need to be purchased.
5
Fig 2
Fig 3
Fig 1
