background image

Fanco Warranty

Please note, this warranty voids any other warranties supplied with this product and 
complies with the new consumer guarantee requirements. 

WARRANTY:
The benefits conferred by this warranty are in addition to all implied warranties, other rights 
and remedies in respect of the product, which the consumer has under Australian Consumer 
Law.

The original purchaser of this Fanco Ceiling Fan is provided with the following warranty 
subject to the following conditions.

Fanco warrants this ceiling fans motor for a period of 5 years from the date of purchase, the 
first 2 years are covered by an in-home warranty.  All parts deemed defective in workmanship 
or materials will be replaced free of charge. 

Warranty conditions for fans installed in Enclosed Alfresco areas are as follows:
Fan must be shielded from wind and rain (enclosed area, min. 1.5m from edge of eave/roof). 
The warranty will cover open circuit motor faults, and remote control (if any) faults if not 
related to outdoor exposure.
The Warranty will not cover outdoor related issues such as rusting, or failure clearly caused 
by water, moisture or wind. 
The Warranty will not cover external appearance or finish of any part of the ceiling fan.
The Warranty will not cover Wooden bladed fans. These are recommended only to be used 
indoors.

This warranty is in addition to any other rights and remedies of the customer under any law. 
In applications not intended for household, personal or domestic use, liability is limited to 
replacement or reimbursement of product only.

Our goods come with guarantees that cannot be excluded under the Australian Consumer 
Law. You are entitled to a replacement or refund for a major failure and compensation for any 
other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired 
or replaced if goods fail to be of acceptable quality and the failure does not amount to a 
major failure.

Any claim under this warranty must be made within 5 years of the date of purchase of the 
product. To make a claim under the warranty,  contact Brilliant Lighting at the address below.

This warranty is given by:
Brilliant Lighting (Aust) Pty. Ltd.
ABN 37 006 203 694
956 Stud Road Rowville, VIC 3178
Phone: 03 9765 2555
Email: info@brilliantlighting.com.au

11

Summary of Contents for CFFCLP2WH-48"












Reviews: