8
2. Remove the screws & washers from the bottom of the motor housing.
Insert the blades through the slots in the motor, Align the blades with screw holes in the
motor housing and secure them with the screws and washers.
3. Feed the main motor wire plug up through the inside of the downrod and then insert the
downrod into the motor bush. Align the holes on the downrod with the holes on the motor.
Gently push the cross pins through the holes and secure them with the cotter pins and screws.
CAUTION - DO NOT FORCE THE CROSS PIN
- Gently wiggle and rotate until it lines up and
slots through both holes.
Summary of Contents for Eco Silent Deluxe DC
Page 1: ...Eco Silent Deluxe DC DC Installation Manual...
Page 16: ......
