STEP 8: Turn the motor housing upside down to install the blades.
STEP 9: Align the first blade onto the lower (H) mounting holes and secure blade loosely with two
screws and washers.
STEP 10: Repeat with the remaining two blades.
STEP 12: With all blades fitted loosely, ensure they are aligned correctly. Flip the fan over and
install the upper (K) screws and washers. Ensure all 12 blade screws (lower and upper) are
tightened.
STEP 13: Slide the lower canopy (L) down over the down rod, followed by the upper canopy lock ring
(M) and upper canopy (N).
Step 14: Reattach the ball (A) by sliding it onto the downrod, inserting the crosspin (D), raising the ball
around the crosspin and securing by the locking screw (B).
H
K
STEP 8,9,10
STEP 12
STEP 13
A
N
M
L
STEP 14
6
