8
INSTALLING THE BOTTOM COVER
STEP 20: Attach the bottom cover by aligning the three slots in the rear of the bottom cover
with the 3 pins in the mounting bracket under the fan.
STEP 21: Push up and twist to secure. The cover will sit flush with the blades
STEP 22: Align the three screw holes in the light base with the screws on the bottom of the
fan, twist together and tighten the screws firmly, taking sure not to pinch the light plugs and
cables
.
INSTALLING THE LIGHT KIT IF PURCHASED
- CLFCORLED
STEP 23: Connect the Light Kit plug to the Plug from the bottom of the fan.
STEP 24: Attach the Light Kit by aligning the three slots in the rear of the Light Kit with the 3
pins in the mounting bracket under the fan.
STEP 25: Push up and twist to secure.
