4
OPERATING INSTRUCTIONS
1.
Press the ON/OFF button to switch the fan on or off.
2.
Choose a speed setting from 1-5 (1 Slowest & 5 Fastest) by pressing the “+” or “-” buttons.
3.
Press TIMER button to start or cancel countdown timer. Adjust desired hours (between 1 to
8 hours) for timer setting by pressing the “+” or “-” buttons when timer display is on.
4.
Adjust screw on the bottom of the motor to choose
either fixed (forward facing)
or
oscillation.
Position 1:
Fixed - forward facing
Position 2:
Oscillation
(Note: side screw must be tightened for oscillation)
MAINTENANCE INSTRUCTIONS
1. Periodic cleaning of your fan is the only maintenance required (approximately every 6 months).
2. WARNING! Ensure that the fan is switched off from the power source before removing the
guard.
3. Remove the guards and the blade, and be careful to not drop the blade!
4. Use a soft cloth with mild soap to clean off any dust or stains, then wipe with a dry cloth.
5. Never use polish or corrosive liquids as this will damage the paint, metal or plastic!
6. Put the blade back and lock the guard securely before use.
7. Reconnect the power cord.
1 2
Air Volume / Timer
Up
OFF/ON
TT IIM
MEER
R
O
ON
N//O
OFF FF
Air Volume / Timer
down
Swing Light
Note:
Display goes into sleep mode after
3
seconds if no control. To wake up display and see
current status of the fan, simply press any button.
Fan memories last operating setting of the fan before power is cut off, including speeds, on/
off.
Power / Timer
Display
Speed Display
Working Status
Indicator
Timer
