USE IN ALL SEASONS
Always ensure fan is set to ‘OFF’ and blades are still, prior to changing direction of blades.
Reverse switch on fan should ideally be set on ‘FORWARD’ (down position) during warmer season to move
blades in a clockwise direction & ‘REVERSE’ (up position) during cooler seasons to make the fan rotate in an
anticlockwise direction (See Fig.6)
Page 4
Fig.6
HOW TO REMOVE THE SHADE (Version with light)
Remove the Lamp Shade carefully as shown (See Fig.7). Turn anticlockwise to remove and clockwise to
tighten the lampshade.
DLS1044 / DLS1344 Models: Only 2 x 15W (MAX) CFL bulbs shall be used. Insert the CFL bulb in the holder
(See Fig.8). Always use a pair of gloves or keep your hands clean when installing or replacing CFL bulbs.
Keeping the globe clean is important and the lifetime of a dirty globe may be shorter than a cleaner globe.
CAUTION: Make sure the power to the fan is not on when inserting light globes (globes not included with
the fan).
DLS134 / DLS1341 Models: Only Quartz Halogen globes with 100W (MAX) shall be used. Insert the Quartz
Halogen bulb in the holder (See Fig.9). Always wear a pair of gloves or keep your hands clean while
installing or replacing Halogen Globes. Keeping the globe clean is important and the lifetime of a dirty
globe may be shorter than a cleaner globe.
Fig.7
Fig.8
Fig.9
