NOTE: THIS FAN MUST BE INSTALLED BY A LICENSED AND QUALIFIED
ELECTRICIAN IN ACCORDANCE WITH LOCAL AUTHORITY REGULATIONS
3
FAN ASSEMBLY
DANGER!
Before commencing installation, turn off electricity supply at the main power
box or disconnect power by removing fuse or turning off circuit breaker. This fan must be
installed by a licensed and qualified electrician in accordance with local authority regulations.
WITHOUT LIGHT
WITH LIGHT
Firstly connect internal wiring by clipping connectors together [a] [push into locked position], then [b] connect mains
active, neutral and earth wires to supply terminal block on mounting plate. It is necessary to run wiring between the fan
and wall controller. Wiring is required to be inaccordance with AS3000 and
the fan MUST be earthed
.
See page 7 for a detailed wiring diagram.
Important Notes: Means of disconnection must be incorporated in the fixed wiring in
accordance with AS3000 wiring rules.
If this fan is a replacement for an existing fan, remove the existing wall speed
controller.
After wiring is completed, attach the canopy to the hanger bracket by pushing upwards and twisting anti-clockwise.
Locate screws in keyholes and tighten.
