Gndfi
13
g
Cleaning
The I-fan may be cleaned wet, but consider the following:
Do not use a
high pressure hose
or aim at motor seals or openings at
close range.
Do not turn the I-fan during or after the cleaning process. Note that the air inlet side is always on the
bottom side.
After cleaning the I-fan, it should run at 100% rpm for at least 30 minutes to remove all dampness.
4.
Technical specifications
Housing
Protection class
IP66
Operating environment
Operating temperature range
0°C to +40°C
Storage temperature range
-10°C tot 50°C
Relative humidity
< 85%, not condensing