Gndfi
4
g
Assembly 63 – 80
The 63-80 tube module is equipped with 6 mounting eyes; you must use at least 4 of these for affixing to
the (roof) structure.
Attach the wire/chain to the tube module and to the (roof) structure. Make sure the wires/chains cross each other.
The wire/chain may not be fed directly through the tube module's hanging eye. Fancom recommends
running steel hanging eyes through the tube module's hanging eyes and then attaching the wire or chain
to this. These hanging eyes and accessories are available in a mounting kit.
Install the protective screen (optional)
Placement of a protective screen is necessary if the I-fan:
•
is within reach of animals and/or people, and
•
is installed at heights less than 2.7 m above the floor.
The blades of the I-fan may run backward due to external influences. To prevent the I-fan turning in the
opposite direction, it is necessary to place a shutter. If the rotating speed of the blades in the opposite
direction is higher than 25% of the I-fan unit's maximum RPM, the I-fan is no longer able to reverse the
blades to the correct direction of rotation. Then, the I-fan will not start and will sound an alarm.
