Lumina 38
Installer
46
Description
Setting of the name of the function.
Time clock type
Setting indicating how the user can use the clock:
•
ON/OFF
: User enters on/off times.
•
ON/DURATION
: User enters time and duration of activation.
Time clock relay
Setting of the analog output address (choice
LINEAR
control) or relay output (choice
RELAY
control).
Relay type
Setting of the passive (not controlled) relay status.
•
N.O.
(normally open) if it makes no contact.
•
N.C.
(normally closed) if it makes contact.
The light clock controls the illumination of the house. Several light clocks can be used per house.
INSTALLER
→
TIME CLOCKS
→
LIGHT
Description
Setting of the name of the function.
Time clock type
Setting indicating how the user can use the clock:
•
ON/OFF
: User enters on/off times.
•
ON/DURATION
: User enters time and duration of activation.
•
INTERMIT
: Intermittent repeat clock. An intermittent light clock can be used to
periodically repeat a certain light pattern. For example, at the beginning of each
hour the lights can be controlled on for 15 minutes, then switched off for the other
45 minutes. Enter the required time settings in the user's menu.
Light relay
Setting of the digital output address (relay) that controls the lighting. This relay
switches the light on and off and can also be used to overrule the control in percent (
analog output). This is important in order to switch off the lighting completely if the
light level, for example, falls below a certain level (
Relay off below
).
Relay type
Setting of the passive (not controlled) relay status.
•
N.O.
(normally open) if it makes no contact.
•
N.C.
(normally closed) if it makes contact.
Summary of Contents for LUMINA 38
Page 1: ...g...
